MIRA 7 – Pro CO2 Laser Cutter & Engraving Machine (700mm x 450mm)
- Class 1 Laser
- Clean pack technology
- High Speed Digital Step Motors
- “All-In-One” Design featuring built-in chiller, exhaust fan and air assist pump
- Standard blade and honeycomb beds
- Super fast engraving speeds of up to 1200mm/s
- Z-depth up to 150mm
- Built in camera* & WiFi as standard (*requires Optional Lightburn Software)
- Typically available ex NZ stock
$11,990.00
With the safety of a fully interlocked case and keyed ignition, the Mira 7 and Mira 9 professional benchtop CO2 lasers are rated Class 1 lasers, the highest safety rating possible. The Mira Pro series incorporates signature AEON features such as “Clean Pack” design and best in class high speeds, while adding some finishing touches, like a fire resistant tempered glass lid, gas shocks and rubber seals.
AEON has focused on improved cutting performance by redesigning the work bed to incorporate both a motorized blade & honeycomb bed, fitted with a downdraft exhaust system (similar to what you would find in our Nova Elite lasers). The exhaust fan and air assist pump have also been upgraded to help with improving airflow and increasing cutting efficiency. Equipped with a built-in fan cooled water chiller (Mira 7) or an active (refrighant type) water chiller (Mira 9), the Mira Pro models are ready to take your laser engraving and cutting capability to the next level.
Benefits
“All-In-One” Design = 90% Less Space Needed
Thanks to an all-in-one design which eliminates the need for external water chiller, extractor fan and air assist pump, the Mira series occupies a much smaller footprint, making it ideal for installations in tight spaces.
30% Increase in Efficiency
High-speed linear rails help to harness the full cutting potential that comes with having a larger laser tube; while traversing when the laser is off can reach speeds of up to 1200 mm/sec, resulting in a significant reduction in cycle times.
“Clean Pack” System = 80% Reduction in Maintenance
Utilizing the drive belts to protect the linear rails and bearing blocks helps to eliminate 99% of the accumulation of dust and debris, practically eliminating any need for maintenance and frequent cleaning that is typically required to maintain steady operation.
Clean Pack DesignOur unique linear motion design utilizes the drive belts themselves to enclose the linear rails and bearing blocks so that they are protected from smoke and debris and can continue to operate without frequent maintenance or repairs. |
Fastest in its ClassThanks to Aeon’s minimalist laser head design and high speed digital stepper motors, the Mira can achieve 5G of acceleration resulting in scan speeds of up to 1200 mm/sec and cutting speeds of up to 680 mm/sec. |
All-In-One SystemAeon has designed its All-In-One solution comprised of an integrated water chiller, exhaust fan and air assist pump so that no extra space is needed for these ancillary components outside of the laser body. |
Smart Rotary DeviceEngrave cylindrical items with either a rotary chuck or a roller rotary and enjoy a painless transition between flat engraving and rotary engraving, thanks to an auto sensing rotary port. |
Versatile ConnectionsEasily send jobs from your PC or Mac via USB, Ethernet or WiFi. There is even 256 MB of onboard memory built into the controller for storing popular jobs. Alternatively, you can run programs straight from a USB thumb drive. |
SoftwareQuickly edit or create simple designs with the included RDWorks software or upgrade to LightBurn simply beautiful software for your laser cutter! Intuitive, feature packed & well supported. For those already familiar with graphic design, simply import graphics directly from CorelDraw, AutoCAD and Illustrator via the handy plugins. |
Red Dot PointerThis visual aid eliminates any guesswork by allowing you to place items inside the machine and quickly position them for accuracy. Furthermore, mirror alignment has never been easier thanks to an inline beam combiner that incorporates the red dot pointer into the CO2 laser path. |
| Model | Mira 7 | |
|---|---|---|
| Working Area | 700mm x 450mm | |
| Machine Size | 1100 mm Wide (plus 350mm for Tube Extension Box), 845 mm Deep, 480 mm High (excl optional stand) | |
| Machine Weight | 128kg | |
| Machine Packing Weight | 160kg | |
| Packing Size | 1220 x 970 x 700 mm | |
| Laser Tube | 80W CO2 Glass Tube | |
| Cooling | Fan Cooled (3000) Water Chiller | |
| Z-Axis Travel | 150mm | |
| Air Assist | 105W Built-In Air Pump | |
| Blower | 330W Built-In Exhaust Fan | |
| Input Voltage | 220-240V AC Single Phase | |
| Frequency | 50 Hz | |
| Rated Power | 1300W | |
| Engraving Speed | 0-1200mm/second | |
| Cutting Speed | 0-680mm/second | |
| Cutting Thickness | 0-20mm (material dependent) | |
| Max Acceleration Speed | 5G | |
| Laser Optical Control | 1-100% Set by software | |
| Minimum Engraving Size | Minimum Font Size 1.0mm x 1.0mm | |
| Max Scanning Precision | 1000DPI | |
| Locating Precision | <=0.01mm | |
| Bed Type | Honeycomb + Blade | |
| Red Dot Positioning | Combiner Type | |
| Built-in WIFI | Included | |
| Auto Focus | Included | |
| Laser Control Software | RD works/Lightburn Software | |
| Graphic Format Supported | JPG/SVG/BMP/DXF/AI/DWG etc. | |
| Compatible Software | CorelDraw/Photoshop/AutoCAD/All kinds of Embroidery Software | |
| Add-Ons | Roller Rotary, Rotary Chuck, Stand, Filtration Fume Extractor, Camera | |
| Warranty | All Aeon lasers are backed by a 2 year factory warranty and Makerspace NZ’s legendary support into the future. | |
|
SMART ROLLER ROTARYExpand your capabilities with this versatile roller rotary device. Perfect for engraving bottles, champagne flutes, wine glasses, etc. |
ROTARY CHUCKThe more precise way of handling cylindrical items is with this 3 jaw rotary chuck. Clamp any item up to 80mm in diameter with Mira 7 or Mira 9, and rotate it for 360 degree engraving |
|
FILTRATION EXTRACTOR – G070FE Advanced Dust & Fume Extractor For Laser Cutters. Variable Air flow up to 700m3/hour Remote Control 4 layer filtration – 99.7% air filtration Includes Spare Primary Filter. NOTE: the larger G150FE model is pictured. |
STANDAdd the convenience of our modern looking stand that is also on wheels for added convenience. |
|
LIGHTBURN SOFTWARE World famous among the laser cutting/engraving community for being the premuim “go to” laser software solution. Lightburn is regularly updated and enhanced. With a great online community for support, together with a bunch of helpful video tutorials you’ll be up to speed in no time! |
FIRE EXTINGUISHER CO2 is the only type of fire extinguisher to have alongside your laser cutter – effective at extinguishing any material fires that may occur in the machine bed. CO2 will leave your laser cutter undamaged as opposed to the potentially terminal damage that a dry powder extinguisher will do! |
Features
With the safety of a fully interlocked case and keyed ignition, the Mira 7 and Mira 9 professional benchtop CO2 lasers are rated Class 1 lasers, the highest safety rating possible. The Mira Pro series incorporates signature AEON features such as “Clean Pack” design and best in class high speeds, while adding some finishing touches, like a fire resistant tempered glass lid, gas shocks and rubber seals.
AEON has focused on improved cutting performance by redesigning the work bed to incorporate both a motorized blade & honeycomb bed, fitted with a downdraft exhaust system (similar to what you would find in our Nova Elite lasers). The exhaust fan and air assist pump have also been upgraded to help with improving airflow and increasing cutting efficiency. Equipped with a built-in fan cooled water chiller (Mira 7) or an active (refrighant type) water chiller (Mira 9), the Mira Pro models are ready to take your laser engraving and cutting capability to the next level.
“All-In-One” Design = 90% Less Space Needed
Thanks to an all-in-one design which eliminates the need for external water chiller, extractor fan and air assist pump, the Mira series occupies a much smaller footprint, making it ideal for installations in tight spaces.
30% Increase in Efficiency
High-speed linear rails help to harness the full cutting potential that comes with having a larger laser tube; while traversing when the laser is off can reach speeds of up to 1200 mm/sec, resulting in a significant reduction in cycle times.
“Clean Pack” System = 80% Reduction in Maintenance
Utilizing the drive belts to protect the linear rails and bearing blocks helps to eliminate 99% of the accumulation of dust and debris, practically eliminating any need for maintenance and frequent cleaning that is typically required to maintain steady operation.
Clean Pack Design
Our unique linear motion design utilizes the drive belts themselves to enclose the linear rails and bearing blocks so that they are protected from smoke and debris and can continue to operate without frequent maintenance or repairs.
Versatile Connections
Easily send jobs from your PC or Mac via USB, Ethernet or WiFi. There is even 256 MB of onboard memory built into the controller for storing popular jobs. Alternatively, you can run programs straight from a USB thumb drive.
Fastest in its Class
Thanks to Aeon’s minimalist laser head design and high speed digital stepper motors, the Mira can achieve 5G of acceleration resulting in scan speeds of up to 1200 mm/sec and cutting speeds of up to 680 mm/sec.
Smart Rotary Device
Engrave cylindrical items with either a rotary chuck or a roller rotary and enjoy a painless transition between flat engraving and rotary engraving, thanks to an auto sensing rotary port.
Software
Quickly edit or create simple designs with the included RDWorks software or upgrade to LightBurn simply beautiful software for your laser cutter! Intuitive, feature packed & well supported. For those already familiar with graphic design, simply import graphics directly from CorelDraw, AutoCAD and Illustrator via the handy plugins.
Red Dot Pointer
This visual aid eliminates any guesswork by allowing you to place items inside the machine and quickly position them for accuracy. Furthermore, mirror alignment has never been easier thanks to an inline beam combiner that incorporates the red dot pointer into the CO2 laser path.
Specifications
| Model | Mira 7 | |
|---|---|---|
| Working Area | 700mm x 450mm | |
| Machine Size | 1100 mm Wide, 845 mm Deep, 480 mm High (excl optional stand) | |
| Machine Weight | 128kg | |
| Machine Packing Weight | 160kg | |
| Packing Size | 1220 x 970 x 700 mm | |
| Laser Tube | 80W CO2 Glass Tube | |
| Cooling | Fan Cooled (3000) Water Chiller | |
| Z-Axis Travel | 150mm | |
| Air Assist | 105W Built-In Air Pump | |
| Blower | 330W Built-In Exhaust Fan | |
| Input Voltage | 220-240V AC Single Phase | |
| Frequency | 50 Hz | |
| Rated Power | 1300W | |
| Engraving Speed | 0-1200mm/second | |
| Cutting Speed | 0-680mm/second | |
| Cutting Thickness | 0-20mm (material dependent) | |
| Max Acceleration Speed | 5G | |
| Laser Optical Control | 1-100% Set by software | |
| Minimum Engraving Size | Minimum Font Size 1.0mm x 1.0mm | |
| Max Scanning Precision | 1000DPI | |
| Locating Precision | <=0.01mm | |
| Bed Type | Honeycomb + Blade | |
| Red Dot Positioning | Combiner Type | |
| Built-in WIFI | Included | |
| Auto Focus | Included | |
| Laser Control Software | RD works/Lightburn Software | |
| Graphic Format Supported | JPG/SVG/BMP/DXF/AI/DWG etc. | |
| Compatible Software | CorelDraw/Photoshop/AutoCAD/All kinds of Embroidery Software | |
| Add-Ons | Roller Rotary, Rotary Chuck, Stand, Filtration Fume Extractor, Camera | |
| Warranty | All Aeon lasers are backed by a 2 year factory warranty and Makerspace NZ’s legendary support into the future. | |
Need some assistance?
Tell us a bit about yourself so we can make sure to send you the right information.